Canadian Virtual ICT Forum – Powered by BICSI

Join us for the Canadian Virtual ICT Forum Powered by BICSI for a one-hour webinar on Thursday, October 29, 2020, at 2:25 EDT during the Canadian Virtual ICT Forum – Powered by BICSI as SPIDA’s President Brett Willitt presents on “Demystifying Pole Loading and Make Ready Determination”.

During this webinar, we will review pole loading and clearance considerations and highlight the differences between common industry pole loading methodologies and their impact on make ready determination and cost. Additionally, we will highlight the balance between clearances and pole loading when formulating make ready recommendations by showcasing a variety of common construction situations. Register below.

To learn more about BICSI visit their website at https://www.bicsi.org/.

 

The Journey to a Grid Digital Twin

Join us for a presentation on The Journey to a Grid Digital Twin by SPIDA Software’s Brett Willitt during the DistribuTECH Conference May 23-25 2022. Time TBD.

The energy transition is introducing new challenges for utilities that build and manage our electrical grid.  Imagine if you had a digital representation of the entire grid, and could use that to simulate and optimize different design and operational alternatives?  How can you use that to dramatically improve the productivity of your teams, while at the same time improving the quality of their design and operational decisions?  In this presentation, we’ll talk about the importance of an open multi-vendor approach to digital twins, and about how it is not a product but rather a journey.  We’ll share some of the early lessons learned implementing digital twins, and the importance of delivering tangible results and continuously learning in every step of that journey.  

To learn more about DistribuTECH and register visit Event Schedule – DISTRIBUTECH International 2022 – Experience The Energy Movement

 

Pole Loading Fundamentals

Pole Loading Fundamentals 

ICYMI: We presented at the TEC 38th Annual Engineering Conference in September on “Pole Loading Fundamentals” and why it’s vital to understand the basics and importance of pole loading analysis.

You can request the presentation below. 

Continue reading “Pole Loading Fundamentals”

Fundamentals of One Touch Make Ready


During the 2019 ISE Expo, we provided a high-level overview of the recent FCC ruling surrounding the Fundamentals of One Touch Make Ready. We also reviewed the concepts covered in the ruling and demonstrated how this process can be simplified using Workflow Management Software, such as SPIDAstudio. 

Continue reading “Fundamentals of One Touch Make Ready”

Build a Better Grid – NWPPA E&O Technical Presentation

NWPPA E&O Technical Presentation

During the 2021 Virtual NWPPA E&O Summit, we provided a high-level overview of SPIDA’s solutions and introduce the latest software addition, SPIDAsilk sag and tension software.

You can request the NWPPA E&O Technical Presentation Presentation below. 

Continue reading “Build a Better Grid – NWPPA E&O Technical Presentation”

Incorporating Pole Loading Software into a Co-Op’s Day to Day Operations

At the CTCE Conference, Jacob Barlow from Randolph Electric Membership Cooperative (REMC) discussed how REMC introduced Pole Loading Software into their daily operations. Request the recording here.